D-One

Price range: $79.32 through $2,483.25

D-One is a non-yellowing, low-sheen acrylic and penetrating concrete sealer designed to enhance color while protecting stamped concrete. Its combination of penetrating and film-forming properties helps defend against water intrusion, de-icing salts, saltwater pool exposure, and common surface stains. Apply with a sprayer and backroll immediately for even coverage and a consistent finish.

TDS | click here
SDS | click here

D-ONE | Enhance Color. Protect the Surface.

Stamped concrete needs a sealer that enhances its appearance while helping protect the surface from everyday exposure. D-One combines acrylic film-forming and penetrating properties in a single, non-yellowing, low-sheen formula.

Designed to bring out the natural color of decorative concrete, D-One creates a clean, low-gloss appearance while helping minimize damage from water intrusion, de-icing salts, and saltwater pool systems.

Its formulation also helps protect against common staining caused by water runoff, leaves, rust, and oil. With good blush resistance and a reduced potential for bubbling when properly applied, D-One helps deliver a consistent finish with less risk of sealer-related callbacks.

Protection for Decorative Concrete

D-One provides multiple protective benefits in one application:

  • Color Enhancement: Enriches the natural color of stamped and decorative concrete with a low-sheen finish.
  • Water Resistance: Helps minimize damage associated with water intrusion.
  • Salt Protection: Helps protect against salt damage from de-icing salts and saltwater pool systems.
  • Stain Resistance: Helps protect against stains caused by leaves, rust, oil, and water runoff.
  • Non-Yellowing Formula: Maintains a clear appearance without the yellowing associated with some sealers.
  • ASTM C-309 Compliance: Meets ASTM C-309 specifications for concrete curing and sealing compounds.

D-One offers excellent penetration and adhesion to clean, unsealed concrete, making it suitable for both new and existing concrete surfaces.

Application: Spray and Backroll

D-One is a low-viscosity, quick-drying sealer that must be applied using a sprayer. Roller-only application using a dip-and-roll method is not recommended and can result in uneven coverage or overapplication.

For best results:

  1. Prepare the Material: Stir thoroughly before use. Material may separate during long-term storage.
  2. Spray Application: Apply using a solvent-resistant pump-up sprayer equipped with a 0.5 GPM tip.
  3. Backroll Immediately: Follow spraying with a 1/2″–1 1/4″ nap roller to distribute the material evenly and prevent overapplication.
  4. Control Coverage: Apply at approximately 250–350 square feet per gallon, adjusting for concrete porosity and surface texture.

Avoid thick applications or puddled areas. Excess material can prevent proper solvent evaporation and may become susceptible to moisture intrusion, resulting in milky white spots.

Coverage and Packaging

  • Coverage: Approximately 250–350 square feet per gallon, depending on surface porosity and texture.
  • Package Size: 5-gallon pail.

Technical Information

Specification Details
Sealer type Acrylic and penetrating
Solids content 15 ± 1%
VOC content Less than 350 g/L
Wet appearance Clear to slightly hazy
Dry appearance Clear, low gloss
Drying time 30 minutes–1 hour
Recoat time 4–24 hours
Foot traffic 4–6 hours*
Wheel traffic 24–48 hours
Application temperature 50°F–80°F
Blush resistance Good
Solvent resistance Minimal
ASTM specification C-309
Coverage 250–350 sq. ft. per gallon
Packaging 5-gallon pail

Timing depends on application conditions and the manufacturer’s current technical guidance.

 

Reviews & Ratings

Reviews

Be the first to review “D-One”

Your email address will not be published. Required fields are marked *