LabFender (Clear)

Labfender is a low-VOC, high-solids aliphatic polyurethane, supplied as a two or three-component system. It goes on as the protective topcoat over Labsurface Labpox epoxies and Labfast and Labshield ECO polyaspartic coatings.

Traffic is what wears out most floor coatings, and this one is built for it. Its abrasion resistance holds up under forklifts, rolling equipment, and heavy foot traffic, so wear patterns are slower to appear. It resists the transfer of plasticizers, the cause of many premature stains. The UV barrier it adds slows yellowing on the epoxy underneath, and the coat itself is non-yellowing. A 60-minute working time lets a small crew cover large areas.

Labfender Advantages

• Smooth finish with no orange peel
• Low viscosity, which reduces the risk of roll marks
• High abrasion resistance for heavy traffic and abusive environments
• High chemical and stain resistance
• Cleans up more easily than epoxy
• Dense film that keeps dirt from working in
• Low moisture sensitivity
• Low-odor and low-VOC, with potential LEED eligibility
• Long pot life
• Interior and exterior use

Where it’s used

• Garage floors
• Flake, quartz, and metallic systems
• Warehouses and manufacturing facilities
• Food and beverage processing plants
• Aerospace and avionics hangars
• Hospitals, schools, and healthcare and veterinary facilities
• Pharmaceutical facilities
• Offices, retail stores, and commercial centers
• Any floor with forklift traffic

1-Gallon Kit = 1 x A (0.8 Gal) + 1 x B (0.2 Gal) + 1 x C 3 lb LABTEC Aluminium Oxide

Labfender (TDS) Technical Data Sheet:  Click Here

Safety Data Sheet:  Click Here