Lavina Red QC Metal Bond

Price range: $24.20 through $60.50

Lavina Red QC metal bond diamonds are formulated for grinding hard concrete between 4,000 and 5,500 PSI. Available in:

  • Button and Rectangular Configurations
  • Single and Double Segment Options
  • Grit Sizes from 14 to 120.

Lavina Quick Change Metal Bond Designed for Hard Concrete

Hard concrete requires a metal bond that allows the diamond segments to stay exposed and continue cutting. When the bond is too hard for the concrete, the diamonds can become glazed, reducing cutting performance and causing the tooling to slide across the surface rather than grind effectively.

For concrete between 4,000 and 5,500 PSI, the Lavina Red QC Metal Bond Series is designed for hard concrete conditions, helping maintain diamond exposure and consistent grinding performance.

Selecting the right segment configuration and grit also affects cutting speed, tooling wear, and the scratch pattern left on the concrete.

Red QC Metal Bond Segment Configurations & Grits

Lavina Red QC metal bond diamonds are available in four configurations:

  • One Button
  • Two Button
  • One Rectangular Segment
  • Two Rectangular Segments

Each configuration is available in 14, 30, 50, 70, and 120 grit.

Choosing the Right Configuration

  • Single-segment tools: Recommended for lighter machines under 30 inches. They provide a more aggressive cut and are also recommended for the first grinding step on larger machines when faster surface opening is desired.
  • Double-segment tools: Recommended for heavier machines 30 inches and larger. Additional segments provide greater surface contact and help refine the scratch pattern.

Fewer segments generally cut faster but wear more quickly. Tool life varies with concrete hardness and surface conditions.

Coating Removal

Segment shape also matters when removing existing coatings:

  • Round button tools: Recommended for cementitious coating removal.
  • Rectangular bar tools: Recommended for non-cementitious coating removal.

Grinding Recommendations

For best results, match the tooling configuration to the grinder size, concrete conditions, and grinding stage. Run metal bond tooling at low RPM.

If the diamonds begin to glaze, the tooling may be too hard for the concrete conditions. Reducing machine weight, lowering RPM, or adding a light water mist or 30-grit silica sand may help restore cutting action. If glazing continues, a softer bond may be needed.

Use Lavina QC tooling with Lavina Security Plates for safe operation.

Not sure which bond is right for the floor? A Mohs Hardness Scratch Test Kit can help identify concrete hardness before selecting tooling.

Lavina Bond Selection Reference

Lavina Series Concrete Hardness Mohs Scale
Yellow Soft, under 2,500 PSI 2–3
Grey Medium, 2,500–4,000 PSI 3–5
Red Hard, 4,000–5,500 PSI 5–6
Gold Extra Hard, 5,500–7,000 PSI 7
White / Black Cap Cutters Super Hard, 7,000–9,000 PSI 8–9

Use a Mohs Hardness Scratch Test Kit to help determine concrete hardness before selecting a metal bond. PSI ranges are general guidelines and actual floor conditions can vary.

Reviews & Ratings

Reviews

Be the first to review “Lavina Red QC Metal Bond”

Your email address will not be published. Required fields are marked *