Surecrete ColorTec 500


SureCrete’s Dura-Kote ColorTec 500 premium color epoxy 100% for floors is available in three and fifteen-gallon kits. 30 Standard colors

SKU: N/A Categories: , Tags: , , ,

SureCrete ColorTec 500 is a 100% solids, 2 component, zero VOC floor coating system that is used in a wide variety of applications: high build color coat for a host of decorative concrete systems, primer coat and binder coat for DK Flakes and Metallics.

Yellowing and blush are minimized by the use of an aliphatic amine curing agent for part B.  Available in a standard (E), premium (P), and a thin viscosity(PTV) option with zero VOC’s. ColorTec pigments achieve the preferred substrate hide and tint uniformity in 100’s of colors. Note: On some bright colors, samples should be done to ensure proper coat.

ColorTec 500 is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

  • (E) Part “B” is an aliphatic amine hardener that delivers a cost effective clear coat. Aliphatic amines are susceptible to blushing and yellowing over time. SureCrete highly recommends the use of a polyurethane or polyaspartic top coat to extend the duration of time before the blushing and yellowing occur.
  • (P) Part “B” is a cycloaliphatic amine hardener that delivers a premium epoxy coating. Cycloaliphatic amines are preferred do to their increased resistance to: impact, chemicals, water/moisture, and high temperatures. In addition, the cycloaliphatic amine hardener aids in lowering blushing, water spotting, and yellowing. SureCrete’s Premium Part “B” is generally used in thick build
    and metallic flooring systems.
  • (PTV) Part “B” is a thin-viscosity cycloaliphatic amine hardener that delivers the same high performance features found in the Premium Part “B” hardener. The main difference being, when you add pigment’s or powders to the mix; such as DK Metallic system, then manipulate and move the powders around, using the Thin Viscosity Part “B” you will achieve a more workable/flow able, 100% solids epoxy mix.


Product Data Sheet [English] - Click Here

Safety Data Sheet [Part A - White Base]  -Click Here

Safety Data Sheet [Part A - Deep Base]  -Click Here

Safety Data Sheet [Part B "E"]  -Click Here

Safety Data Sheet [Part B "P"]  -Click Here

Safety Data Sheet [Part B "PTV"]  -Click Here

ON Demand Color Chart  -Click Here

Additional information


SureCrete Products


High Gloss


Premium Thin Viscosity


3-Gal Kit (Part A&B)


There are no reviews yet.

Be the first to review “Surecrete ColorTec 500”

Your email address will not be published. Required fields are marked *

Presets Color